Installation and Settings
CardioCoach PRO User Manual | Page 62
17. To
add
a level, click the green + button to the right of the level
descriptive box.
18. To
delete
a level, click the trash icon to the right of the level descriptive
box.
19. When more than one level is created, click the desired tab above the
description box to edit that level. You may need to click the left and
right arrows to the right of the description box to view all level tabs.
20. Click Save to save the level and the protocol.
21. To make additional changes to levels and stages within a protocol,
click the name of the newly created protocol from the protocol list and
edit as desired, beginning with step 6 above.
Import/Export Protocols
A protocol created within CardioCoach software can be shared between
CardioCoach users as a .ptcl file.
To
import
a CardioCoach protocol, follow the steps below.
1. Verify that you have a .ptcl file on your computer.
2. Go to Edit Protocols.
3. Click the Import button at the bottom of the Edit Protocol page.
4. Navigate to the folder where the .pctl file is stored. The CardioCoach
software will seek to identify the protocol file.
5. Highlight the file, and then click the Open button.
6. Modify the protocol as desired.
7. Click Save.
To
export
a CardioCoach protocol, follow the steps below.
1. Go to Edit Protocols and open the desired protocol.
2. From the bottom of the screen, click the Export button.
3. Select a location to save the protocol file.
4. Edit the name of the file if desired. Click Save.
Note: The CardioCoach software expects the final step in a protocol to
be the recovery step. Once the CardioCoach enters Recovery Mode,
the protocol will skip to the final step in the script if it hasn’t already
done so.
Note: Imported protocols are not added to your protocol list if not
saved.
To Next Page
Loading...