To format test results, follow the steps below.
1. From the Settings menu, click on Format Results on the left side of
the screen.
2. Enter the plot colors and upload an image logo as described below.
Then click the Save button.
a) Plot Colors. The colors for the graph lines (heart rate, VO
2,
AT,
etc.) can be customized. Click on the colored circle you wish to
change and select a color from the palette.
b) VO2 Report Text.
o Results Screen (What’s Next). Each page of the results has
a field available for the trainer to insert custom instructions
on the VO2 report client printout. For simplicity, a default
text may be added here, then edited for individual clients
on the results screen as appropriate.
o Graph Explanation. Each graph on the client results
printout has a place for the trainer to provide explanations.
Use this space to enter a default text if desired.
o Table Data Analysis. Each table on the client results
printout has a place for the trainer to provide explanations.
Use this space to enter a default text if desired.
c) RMR Report Text.
o Results Screen (What’s Next). Each page of the results has
a field available for the trainer to insert custom instructions
on the RMR report client printout. For simplicity, a default
text may be added here, then edited for individual clients
on the results screen as appropriate.
d) VO2 Report Pages. Listed are all the possible options for the VO2
report. Two columns are listed: trainer and client. This is meant
to give you two go-to options when exporting a report. You may
choose to have one be a more detailed version of the report, and
the other a concise version. When a test is completed, you’ll have
the option to print a “trainer” or “client” version of the report.
Click the boxes to select what you would like on that graph, or
data point on the trend table visible. A blue check mark will
appear over the selected boxes.
To Next Page
Loading...