KORR CardioCoach PRO - VO2 Max Test Results and Options

Product Overview
Installation and Settings
CardioCoach Operation
Important Notes
Quality Test Procedures
Maintenance
CardioCoach PRO User Manual | Page 40
b) Click No to return the CardioCoach PRO to test mode and continue
testing.
20. Max Effort. Respond to the Max Effort Yes/No? prompt.
a) Click Yes if client indicates they exerted a maximum effort. Peak
heart rate will be used for VO
2
Max measurement.
b) Click No if client indicates they exerted a sub-max effort.
CardioCoach PRO algorithm will extrapolate an estimated VO
2
Max
value for comparison data.
21. Begin Drying Cycle. At the completion of Recovery, the client can be
disconnected. The CardioCoach PRO will begin an internal drying cycle
that will automatically turn off after 20 minutes. To prolong the life of
the unit, the drying cycle should be allowed to complete after testing.
In the case of back-to-back tests, the cycle should be allowed to
complete after the last test is completed.
Results
VO
2
Max Test Results
The CardioCoach PRO VO
2
Max test displays the results on a page similar to
the one shown below.
The information described below is included in the test results. You may
need to scroll down to view all results.
• VO
2
, Heart Rate, Calories burned per hour, and METs.
o Values at Start
o Values at Aerobic Threshold (AeT)
o Values at Anaerobic Threshold (AT)
o Values at Peak Heart Rate or VO
2
Max
o Values at Extrapolated VO
2
Max (if VO
2
Max not reached)