Installation and Settings
CardioCoach PRO User Manual | Page 31
8. Once you have adjusted the straps for a good fit, you can set the
mask aside until you are ready to begin testing.
Position the Heart Rate Strap
The heart rate sensors have two parts: the chest strap and the connector.
1. Moisten the electrode areas on the reverse side of the chest strap
with water or electrode gel, as illustrated below.
2. Attach the connector to the strap. Adjust the strap length to fit tightly
but comfortably around your client’s chest.
3. Tie the strap around the client’s chest, just below the chest muscles,
and attach the hook to the other end of the strap.
To Next Page
Loading...