Kostal PLENTICORE plus - Page 129

129
6
© 2018 KOSTAL Solar Electric GmbH
System monitoring
n
Solar portal
Input of solar portal configuration. If you want to use
a solar portal, the log data and events can be sent to
the solar portal.
Menu item Function
Portal
Selection of solar portal.
Activate portal
Activates the transfer to the solar
portal.
Last data transfer Indicates when the inverter last
transferred data to the solar portal
(provided the function is active).
Last successful data
transfer
Indicates when the inverter last
successfully transferred data to the
solar portal (provided the function is
active).
n
Reset settings
Reset system owner settings to factory settings.
Menu item Function
Reset system owner
settings
The values for the basic settings,
network, Modbus/SunSpec and
solar portal are reset to the factory
settings.
INFO
The solar portal can only be used
for inverters, which are linked to the
Internet.
2
3
4
5
6
7
8
9
10
11
12
13
1