Kostal PLENTICORE plus - Setting Up Self-Consumption Control

166
9
© 2018 KOSTAL Solar Electric GmbH
Maintenance
9.3 Setting up self-consumption control
Switched output
Function
Self-consumption control
Function 1 (time- and power-related)
Power limit [W]
Limit must be exceeded for [min]
Run time [min]
Frequency of activation [number/day]
Function 2 (power-related)
Activation limit [W]
Deactivation limit [W]
Other options
Leave switched output activated in event of power loss or fault
Permitted period of time for power loss or
fault [min]
Permit battery usage for the switched output
Fig. 62: Self-consumption control functions for Webserver
Several functions are available here to enable the user to
control self-consumption. You will find a more accurate
explanation on the following pages.
When a battery is connected, “dynamic self-consump-
tion control” should always be selected.
2
3
4
5
6
7
8
9
10
11
12
13
1