Kostal PLENTICORE plus - Switching the Inverter On

77
4
© 2018 KOSTAL Solar Electric GmbH
Operation and operating the device
4.1 Switching on the inverter
1. Activate supply voltage via the line circuit breaker.
2. If present, switch on battery storage using battery
switch.
P
The battery storage starts up.
3. Move DC switch on inverter to ON position.
Fig. 10
If external DC voltage separators are present, activate
the DC strings consecutively.
P
The inverter starts up.
P
During start-up, the LEDs in the control panel of the
inverter light up briefly.
P
The screensaver appears on the display and displays
the device type. The screensaver is deactivated
when a key is pressed twice.
H
The inverter is in operation.
INFO
When no key has been pressed for
several minutes, the screensaver with
the image of the inverter appears
automatically on the display.
2
3
4
5
6
7
8
9
10
11
12
13
1