Kostal PLENTICORE plus - KOSTAL (PIKO) Solar Portal

152
7
© 2018 KOSTAL Solar Electric GmbH
General information
The solar portal, manufactured by KOSTAL Solar Electric
GmbH, is a free internet platform for monitoring PV
systems.
The inverter sends the PV system's yield data and event
messages to the solar portal via the internet.
The information is then stored in the solar portal. You can
view and call up this information via the internet.
Prerequisites for using the solar portal
n
The inverter must have a connection to the internet.
n
The inverter must not yet be logged onto the solar
portal
n
The inverter must not yet be assigned to a plant.
To use the solar portal, follow these two steps:
n
Activate data transfer to the solar portal in the
inverter. Activation can be performed using the
Webserver or the inverter menu
.
n
Register (free of charge) on the KOSTAL Solar
Electric GmbH website to use the KOSTAL (PIKO)
Solar Portal.
INFO
If there are several inverters in a plant,
data transfer to the solar portal must
be set up separately for each inverter.
7.3 The KOSTAL (PIKO) Solar Portal
2
3
4
5
6
7
8
9
10
11
12
13
1