Kostal PLENTICORE plus - Transport and Storage

41
3
© 2018 KOSTAL Solar Electric GmbH
Installation
3.1 Transport and storage
The function of the inverter has been tested and it has
been carefully packaged prior to delivery. Upon receipt,
check the delivery for completeness and any transport
damage.
Complaints and damage claims are to be directly
addressed to the shipping company.
If stored for a longer period before installation, all inverter
components must be kept dry and dust-free in the origi-
nal packaging.
Fig. 15: Grip strips on inverter
For enhanced inverter transport, use the grip strips on
the left and right side of the inverter.
DAMAGE POSSIBLE
Potential risk of damage when put-
ting down the inverter. Whenever
possible, place the inverter on its
back after unpacking.
2
3
4
5
6
7
8
9
10
11
12
13
1