Kostal PLENTICORE plus - Proper Use

8
1
© 2018 KOSTAL Solar Electric GmbH
General information
1.1 Proper use
The inverter converts direct current into alternating
current. This can be used as follows:
n
For self-consumption
n
For feed-in into the public grid
n
For temporary storage in a battery storage system
The device may only be used in grid-connected photo-
voltaic systems within the permissible power range and
under the permissible ambient conditions. The device is
not intended for mobile use.
Inappropriate use may lead to injury or even death for
the user or third parties. Material damage to the device
and other equipment can also occur. The inverter may
therefore only be used for its intended purpose.
All components fitted on the inverter or in the PV system
must satisfy the standards and guidelines that apply in
the country of installation.
The PLENTICORE plus battery inverter may only be used
in conjunction with battery systems, which have been
approved by KOSTAL Solar Electric GmbH for this type
of inverter.
INFO
For battery storage to be connected
to the inverter, DC input 3 must be
released for battery use. To do this,
an activation code must be entered in
the inverter. The activation code can
be purchased from the KOSTAL Solar
online shop.
Ch. 12.4
2
3
4
5
6
7
8
9
10
11
12
13
1