Kramer MV-6 - Page 53

MV-6 - Protocol 3000 Commands
49
Command - LOCK-FP
Command Type - System
Command Name
Permission
Transparency
Set:
LOCK-FP
End User
Public
Get:
LOCK-FP?
End User
Public
Description
Syntax
Set:
Lock front panel
Option 1: #LOCK-FP␠lock_mode␍
Option 2: #LOCK-FP␠device_id,lock_mode␍
Get:
Get front panel lock state
Option 1: #LOCK-FP?␍
Option 2: #LOCK-FP?␠device_id␍
Response
Set: Option 1: ~nn@LOCK-FP␠lock_mode␠OK␍␊
Option 2: ~01@LOCK-FP␠device_id,lock_mode␠ OK␍␊
Get: Option 1: ~nn@LOCK-FP␠lock_mode␍␊
Option 2: ~01@LOCK-FP␠device_id, lock_mode␍␊
Parameters
lock_mode - 0/OFF - unlocks the front panel buttons, 1/ON - locks the front panel buttons
device_id - for K-Net controllers, select the button panel to lock. Locking is allowed only from the master
Response Triggers
Notes
Command - MACH-NUM
Command Type - System
Command Name
Permission
Transparency
Set:
MACH-NUM
End User
Public
Get:
-
-
-
Description
Syntax
Set:
Set machine number
#MACH-NUM␠ machine_number␍
Get:
-
-
Response
~nn@MACH-NUM␠machine_numberOK␍␊
Parameters
machine_number - new device machine number
Response Triggers
Notes
Some devices do not set the new machine number until the device is restarted
Some devices can change the machine number only from DIP-switches