Part 2: Overview of display values and settings General area
19
SERVICE
Input of values for the yearly maintenance message
Delete active maintenance display:
Open control panel cover, press prog. button 2x Ä, set
display value to "00" using Ç and confirm with Ä.
Delete programmed yearly message:
At the level General/Service set the value SERVICE
=>DAY or
SERVICE => OPERATING H to dashes.
RESET …
The three value groups can be reset to the factory setting
using the Reset function.
Select function using Ä, set to "01" using Ç and confirm
with Ä.
To Next Page
Loading...