Kromek D5 RIID - Page 32

MAL-OPS-1026 v3 32
When in Search Mode, training mode is
indicated as shown on the right.
When in Confirmation Mode, training mode is
indicated as shown on the right.
When training mode is enabled, detected
isotopes will be displayed as follows:
 Ba-133 will display as WGPu
 Co-57 will display as U-235
 Co-60 will display as U-238
Neutron counts are unaffected.
To ensure that the training mode is not left on
accidentally, training mode will automatically
disable when the D5 RIID power cycles.