MAL-OPS-1026 v3 39
Navigating to the alarm test setting allows for
an alarm test to take place. Turning this setting
on will sound the alarm as the settings dictate,
whether that be audio only, vibration only,
both audio and vibration or silent mode.
9.13. Sounder and Vibration
An alarm can be accompanied by an audible or vibrational alert. A standard user
can disable the sounder (which relates to an audible alarm) or vibration, but they
cannot disable both at the same time. Using the right-hand key to select “toggle”
will enable or disable the alarm indicators. If a user tries to disable both the
sounder and vibration, then one of the functions will automatically enable.
To Next Page