MAL-OPS-1026 v3 60
Warnings are given to make sure that a maintenance user knows that disabling
alarm accompanying sounds and vibrations can reduce the device’s ability to alert
a user to hazards.
12.6.2. Confirmation Mode
In this section of the app, the user can select the confirmation mode time. A 30
second, 2 minute, 5 minute or variable confirmation mode scan time can be
In this section of the app, search mode ID can be enabled and disabled. This allows
the user to use the D5 settings app to switch the attached D5 RIID between search
mode without ID and search mode with ID.
12.6.4. Radionuclide Library
In this section of the app, the user can enable and disable the D5 RIID’s ability to
identify specific isotopes. The isotopes cover the full D5 RIID library across four
categories, including industrial, medical, NORM and special nuclear material.
If an isotope is enabled, and therefore the D5 RIID will be able to identify this
isotope, then the toggle will be enabled.
To Next Page