Start-up
52
Pos: 64.1 /Überschri ften/Überschri ften 1/F-J/Inbetriebnah me @ 0\mod_11963270758 11_78.docx @ 6375 @ 1 @ 1
7 Start-up
Pos: 64.2 /Überschri ften/Überschri ften 2/U-Z/Vorbereitu ngen am Traktor @ 2\mod_1202 363643678_78.doc x @ 58694 @ 2 @ 1
7.1 Preparations on tractor
Pos: 64.3 /BA/Sic herheit/7. Gefahrenhin weise alt/Mähwerke/ Gefahr - Unbeabsichtig tes Abkuppeln Frontmäh werke @ 3\mod_1204641660 735_78.docx @ 71218 @ @ 1
Danger! - Inadvertent uncoupling of the machine during road travel or work.
Effect: Danger to life, serious injuries or serious damage to the machine.
• Use extreme caution when attaching implements to or detaching them from the tractor! The
accident prevention regulations must be complied with absolutely.
• When attaching or detaching the machine, do not walk between the tractor and the
machine!
• The lower suspension arms of the front hydraulics on the tractor must be adjusted to swing
freely. (see operating instructions for the front hydraulics)
• If the lower suspension arms on the tractor cannot be adjusted to swing freely, free-
swinging lower suspension arm adapters must be installed.
• Lower suspension arm adapter order no. 140 190 (1x)
Pos: 64.4 /BA/Er stinbetriebnahme/EasyCu t/Erstinbetriebna hme Modulgruppen/Vor bereitungen am Traktor EC F 360 CV/CR @ 249\mod_13968 60923624_78.doc x @ 1934719 @ @ 1
• Change front lifting unit to single-action.
• Disconnect lower links so that they can swing freely.
• Move front axle suspension to central position and deactivate it.
• Initial start-up has been made.
• Move tractor to assembling position.
• Connect lower links to the machine.
• Connect universal shaft to the tractor.
• Connect top link to the machine.
• Bring machine into transport position.
• Hinge relief springs as far to the outside as possible on top link clevis.
• Pull parking support upward until it engages.
Pos: 64.5 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_119617531122 6_0.docx @ 4165 @ @ 1