Krone EasyCut F 360 CV User Manual

Settings
71
Pos: 70.11 /Übersc hriften/Überschri ften 3/F-J/Gezogene Ausführ ung @ 245\mod_13959166 18167_78.docx @ 1914247 @ 3 @ 1
10.1.2 Trailed Design
Pos: 70.12 /BA/Er stinbetriebnahme/Easy Cut/F 360 CV/CR/Entla stungsfedern einstel len EC F 320 CV / EC F 360 CV/CR gezogen @ 333\mod _1429014682648_78.doc x @ 2543289 @ @ 1
EC-523-0
1
Fig. 40
Set the ground pressure of the mower by using the threaded spindle (1).
Turn threaded spindle clockwise = high mower relief = low ground pressure
Turn threaded spindle anti-clockwise = low mower relief = high ground pressure
Setting the ground pressure:
•
• Turn off PTO shaft.
• Lower mower via front hydraulics of tractor into working position.
• Switch off tractor engine, remove ignition key and carry it with you.
Reducing ground pressure
• Turn threaded spindle (1) clockwise.
Increasing ground pressure
• Turn threaded spindle (1) anti-clockwise.
Pos: 70.13 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1

Krone EasyCut F 360 CV Specifications

General

Brand	Krone
Model	EasyCut F 360 CV
Category	Farm Equipment
Language	English