Krone EasyCut F 360 - Safety; Purpose of Use; Intended Use; Service Life of the Machine

Safety
10
Pos: 9 /Überschrif ten/Überschrifte n 1/P-T/Sic herheit @ 0\ mod_1195566748 646_78.doc x @ 635 @ 1 @ 1
3 Safety
Pos: 10 /Überschri ften/Überschrift en 2/U-Z/VV erwendungsz weck @ 1\mod_ 120170724673 8_78.docx @ 5 4055 @ 2 @ 1
3.1 Purpose of Use
Pos: 11 /BA/Einl eitung/EasyCut/ Verwendungsz weck Mäher @ 3\mod_120 4547495418_ 78.docx @ 70590 @ @ 1
The EasyCut disc mower is used for cutting crops growing on the ground (except maize).
Pos: 12.1 /Übersc hriften/Übersc hriften 2/A-E/B Bestimmungsg emäßer Gebr auch (alt) @ 0\ mod_1196401 545090_78.doc x @ 7728 @ 2 @ 1
3.2 Intended Use
Pos: 12.2 /BA/Einl eitung/Besti mmungsgemäßer Gebrauch/Eas yCut/Bestimmu ngsgemäßer Ge brauch (Einzahl) @ 3\m od_12045483578 09_78.docx @ 70671 @ @ 1
The disc mower is built exclusively for customary use in agricultural work (intended use).
Pos: 12.3 /BA/Einl eitung/Besti mmungsgemäßer Gebrauch/Nicht bestimmungs g emäss (2012- 03-19 16:41:15) @ 0\mod_11964 01324340_78.d ocx @ 7690 @ @ 1
Any use of the machine for other purposes is deemed not to be in accordance with intended
use. The manufacturer shall not be liable for any resulting damage; the user alone shall bear
the risk.
Operation in accordance with intended use also includes observing the operating, maintenance
and service instructions specified by the manufacturer.
Unauthorised modifications to the machine may affect the properties of the machine or disrupt
proper operation. For this reason, unauthorised modifications shall exclude any liability of the
manufacturer for consequential damage.
Pos: 13 /Überschri ften/Überschrift en 2/K-O/NNu tzungsdauer der Maschin e @ 318\mod_14 23658430909 _78.docx @ 2465 744 @ 2 @ 1
3.3 Service life of the machine
Pos: 14 /BA/Einl eitung/Nutzung sdauer der Masc hine_Text @ 318\mod_142 3556613022_ 78.docx @ 24631 45 @ @ 1
– The service life of this machine strongly depends on proper use and maintenance as well as
the operating conditions.
– Permanent operational readiness as well as long service life of the machine can be
achieved by observing the instructions and notes of these operating instructions.
– After each season of use, the machine must be checked thoroughly for wear and other
damage.
– Damaged and worn parts must be replaced before placing the machine into service again.
– After the machine has been used for five years, carry out full technical inspection of the
machine. According to the results of this inspection, a decision concerning the possibility of
reuse of the machine should be taken.
– Theoretically, the service life of this machine is unlimited as all worn or damaged parts can
be replaced.
Pos: 15 /Layout M odule /---------------Seitenumbruch---------------- @ 0\m od_119617531 1226_0.docx @ 4 165 @ @ 1