Krone EasyCut F 360 User Manual

Maintenance - Lubrication 15
Lubrication chart - Machine 15.2
EasyCut F 320 M
Original Operating Instructions 150000808_01_en 83
15.2 Lubrication chart - Machine
The information on maintenance intervals is based on average load of the machine. In case of
an increased load and under extreme working conditions, the time periods must be reduced.
The types of lubrication are marked by means of icons in the lubrication chart, refer to table.
Type of lubrication Lubricant Comment
Grease Multi-purpose grease
 Apply twostrokes of
lubricating grease from the
grease gun per grease
nipple.
 Remove excess lubricating
grease at the grease nipple.

Krone EasyCut F 360 Specifications

General

Brand	Krone
Model	EasyCut F 360
Category	Lawn Mower
Language	English