Krone EasyCut F 360 User Manual

11 Maintenance - General Information
11.2 Tightening torques
60
EasyCut F 320 M
Original Operating Instructions 150000808_01_en
11.2 Tightening torques
Metric thread screws with control thread
INFORMATION
The table does not apply to countersunk screws with hexagon socket in case the countersunk
screw is tightened via hexagon socket.
DV000-001
X Thread size 1 Strength class on screw head
X Strength class
5.6 8.8 10.9 12.9
Tightening torque (Nm)
M4 3.0 4.4 5.1
M5 5.9 8.7 10
M6 10 15 18
M8 25 36 43
M10 29 49 72 84
M12 42 85 125 145
M14 135 200 235
M16 210 310 365
M20 425 610 710
M22 571 832 972
M24 730 1,050 1,220
M27 1,100 1,550 1,800
M30 1,450 2,100 2,450

Krone EasyCut F 360 Specifications

General

Brand	Krone
Model	EasyCut F 360
Category	Lawn Mower
Language	English