Machine Description
21
Pos: 40.3 /BA/Sich erheit/4. Sich erheitsaufkleb er/EU - ISO /93 9/939 471 1 ( 1x) Bestell-Nr. @ 189\mod_13 81220124664_ 78.docx @ 162 2309 @ @ 1
1) Order no. 939 471 1 (1x)
Pos: 40.4 /BA/Sich erheit/4. Sich erheitsaufkleb er/EU - ISO /93 9/939 471 1 Bild /Text Imm er als ersten Sich erheitsaufkleber benutzen @ 1 89\mod_1381 212141744_7 8.docx @ 1621 596 @ @ 1
L
Danger due to incorrect operation and lack of knowledge
Incorrect operation and lack of knowledge of the machine as well
as incorrect behaviour in hazardous situations is risking the life of
the operator and third parties.
• Before starting up the machine, read and follow the operating
instructions and safety instructions.
Pos: 40.5 /BA/Sich erheit/4. Sich erheitsaufkleb er/EU - ISO /93 9/939 101 4 ( 1x) Bestell-Nr. @ 198\mod_13 84850393482_ 78.docx @ 167 2362 @ @ 1
2) Order no. 939 101 4 (1x)
Pos: 40.6 /BA/Sich erheit/4. Sich erheitsaufkleb er/EU - ISO /93 9/939 101 4 Bild /Text @ 198\ mod_13848504 09063_78.doc x @ 1672391 @ @ 1
MAX.
1000/ min
MAX. 200 bar
Danger due to exceeding the maximum permissible PTO
speed or the maximum permissible operating pressure.
If the permissible PTO speed is exceeded, machine parts may be
destroyed or flung out.
If the maximum permissible operating pressure is exceeded,
hydraulic components may be damaged.
As a result, people may be seriously or fatally injured.
• Observe the permissible PTO speed.
• Observe the permissible operating pressure.
Pos: 40.7 /BA/Sich erheit/4. Sich erheitsaufkleb er/EU - ISO /93 9/939 576 0 ( 4x) Bestell-Nr. (O hne Anzahl) @ 367\mod_144 1353475436_ 78.docx @ 269 7132 @ @ 1
3) Order no. 939 576 0
Pos: 40.8 /Abkürzu ngen /Abkürzu ngen sprach neutral/EasyCut/E asyCut F 280 M / EasyCut F 320 M / Eas yCut F 360 M (2x) @ 367\ mod_144135399172 7_0.docx @ 2697163 @ @ 1
EasyCut F 280 M / EasyCut F 320 M/ EasyCut F 360 M (2x)
Pos: 40.9 /Abkürzu ngen /Abkürzu ngen sprach neutral/EasyCut/E asyCut F 280 / EasyCut F 32 0 / EasyCut F 360 (4x) @ 36 7\mod_14413 54166300_0.d ocx @ 269726 4 @ @ 1
EasyCut F 280 / EasyCut F 320 / EasyCut F 360 (4x)
Pos: 40.10 /BA/Sic herheit/4. Sic herheitsaufkle ber/EU - ISO /9 39/939 576 0 Bild/Text 3-fach Aufkleber @ 1 94\mod_13835 49620226_78. docx @ 16488 64 @ @ 1
L
a)
Danger from turning machine parts
There is a risk of injury as machine parts may
still continue to run for a certain time after
being switched off
• Do not touch any moving parts of the
machine.
• Wait until the machine parts have come to
a complete stop.
b)
Danger from objects being flung out
When the machine is running, there is a risk of
injury as objects may be flung out
uncontrollably.
• Before start-up, move guards into
protective position.
c)
Danger from objects being flung out
When the machine is running, there is a risk of
injury as objects may be flung out
uncontrollably.
• Keep your distance when the machine is
running.
Pos: 40.11 /La yout Module /---------------Seitenumbruch---------------- @ 0\ mod_11961 75311226_0.doc x @ 4165 @ @ 1
To Next Page
Loading...
