Safety 2
Safety features 2.7
EasyCut F 320 M
Original Operating Instructions 150000808_01_en 29
10. Order No. 27 021 593 0 (1x)
WARNING
Keep tractor hydraulic controls locked during
road transport to prevent implement move-
ment and possible personal injury.
2.7 Safety features
KMG000-088
Pos. Designation Explanation
1 Stop cocks • When transporting the machine and when
working under the machine, always close the
stop cocks.
2 Overload protection • The overload protection protects the tractor
and the machine from load peaks
To avoid damaging the machine, switch off the
PTO shaft if the overload clutch engages
continuously.
3 Road travel lighting • The road travel lighting is used for road safety.
• Before driving on roads, switch on the road
travel lighting and ensure that it functions
properly.
To Next Page
Loading...
Need help?
General
