Safety
8
Pos: 15 /Überschrif ten/Überschrif ten 1/P-T/Sicherheit @ 0\ mod_1195566748646_78. docx @ 635 @ 1 @ 1
4 Safety
Pos: 16 /Überschrif ten/Überschrif ten 2/U-Z/Verwendungsz weck @ 1\mod_1201707246738_ 78.docx @ 54055 @ 2 @ 1
4.1 Purpose of Use
Pos: 17 /BA/Einleitu ng/EasyCut/Verwendun gszweck Mäher @ 3\mod_12 04547495418_78.doc x @ 70590 @ @ 1
The EasyCut disc mower is used for cutting crops growing on the ground (except maize).
Pos: 18.1 /Überschri ften/Überschri ften 2/A-E/Bestimmungs gemäßer Gebrauch (alt) @ 0\mod_1196401545090_78. docx @ 7728 @ 2 @ 1
4.2 Intended Use
Pos: 18.2 /BA/Einlei tung/Bestimmungsge mäßer Gebrauch/EasyCut/ Bestimmungsgemäßer Gebrauch (Einzahl) @ 3\ mod_1204548357809_78. docx @ 70671 @ @ 1
The disc mower is built exclusively for customary use in agricultural work (intended use).
Pos: 18.3 /BA/Einlei tung/Bestimmungsge mäßer Gebrauch/Nicht b estimmungs gemäss (2012-0 3-19 16:41:15) @ 0\mod_ 1196401324340_78. docx @ 7690 @ @ 1
Any use of the machine for other purposes is deemed not to be in accordance with intended
use. The manufacturer shall not be liable for any resulting damage; the user alone shall bear
the risk.
Operation in accordance with intended use also includes observing the operating, maintenance
and service instructions specified by the manufacturer.
Unauthorised modifications to the machine may affect the properties of the machine or disrupt
proper operation. For this reason, unauthorised modifications shall exclude any liability of the
manufacturer for consequential damage.
Pos: 19 /Überschrif ten/Überschrif ten 2/K-O/Nutzungsdauer der Maschine @ 318\mod_142 3658430909_78.doc x @ 2465744 @ 2 @ 1
4.3 Service life of the machine
Pos: 20 /BA/Einleitu ng/Nutzungsdauer der Maschine_Text @ 318\mod_1 423556613022_78.d ocx @ 2463145 @ @ 1
– The service life of this machine strongly depends on proper use and maintenance as well as
the operating conditions.
– Permanent operational readiness as well as long service life of the machine can be
achieved by observing the instructions and notes of these operating instructions.
– After each season of use, the machine must be checked thoroughly for wear and other
damage.
– Damaged and worn parts must be replaced before placing the machine into service again.
– After the machine has been used for five years, carry out full technical inspection of the
machine. According to the results of this inspection, a decision concerning the possibility of
reuse of the machine should be taken.
– Theoretically, the service life of this machine is unlimited as all worn or damaged parts can
be replaced.
Pos: 21 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
Need help?
General
