Krone Profi Liner - Maintenance Intervals for the Driver

MAINTENANCE AND REPAIR
178
Operating instructions • Semitrailer • 505369471-04 • 02/2019
Assembly group Maintenance work Monthly Every
six
months
Yearly
Container lock (see
"10.2.14 Container
lock", pg.181)
► Perform a visual inspection for wear
and damage.
X
Kingpin (see
"10.2.12 Kingpin
and coupling plate",
pg.181)
► Perform a visual inspection for wear
and damage.
► Measure the wear and replace the
kingpin if necessary.
► Check the mounting and tighten if re-
quired.
► Lubricate with high-pressure grease.
X
10.2.3 Maintenance intervals for the driver
Assembly group Maintenance work Monthly Every
six
months
Yearly
Wheels and tyres
(see "10.2.4 Wheels
and tyres", pg.179)
► Check the tightening torques of the
wheel nuts.
► Check the tyres and the tyre inflation
pressure.
X
Axle and suspen-
sion (see "10.2.5
Axle and suspen-
sion", pg.179)
► Observe the maintenance instructions
from the axle manufacturer.
X
Compressed air
system (see "5.7
Draining the com-
pressed air tanks",
pg.37)
► Check the compressed air tank.
► Check the compressed air connec-
tions.
X
Contour marking
(see "10.2.9 Contour
marking", pg.180)
► Check the contour markings for com-
pleteness and legibility.
X
Load securing (see
"10.2.11 Load secur-
ing", pg.181)
► Perform a visual inspection for wear
and damage.
X
Kingpin (see
"10.2.12 Kingpin and
coupling plate",
pg.181)
► Perform a visual inspection for wear
and damage.
X