Krone Swadro TC 680 - Protecting the Tine Tips (Transport Position and Rotary Rake Switched Off)

Operation
81
Pos: 32.96 /Übersc hriften/Überschri ften 2/U-Z/ZZinkenschu tze anbringen @ 36\mod_1 263218287043_78.doc x @ 338452 @ 2 @ 1
9.11 Protecting the tine tips (transport position and rotary rake switched off)
Pos: 32.97 /BA/Bedienun g /Schwader/Zinke n / Zinkenarme/Zinkensc hutze anbringen Bild S W TC 680_760 @ 213\mod_138994420 1475_78.docx @ 1747510 @ @ 1
SW700075_1
1
1
Fig. 50
Pos: 32.98 /BA/Bedienun g /Schwader/Zinke n / Zinkenarme/Zinken un ter 2 m mit Zinkenschutze sicher n Text @ 36\mod_1263218917 700_78.docx @ 338477 @ @ 1
The tines must be fitted with guards which are positioned at less than 2 m in transport position
or when the machine is switched off. The tine guards are located on the front supports (right
and left side of the machine).
• Raise the rotor arms into transport position.
• Turn off the tractor and secure it against the possibility of rolling back.
• Insert the tine guards (1) onto the tines.
• Repeat this process for the other machine side.
Pos: 32.99 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1