9 SERVICE SCHEDULE 119
K10N K100A K200A K400A
Check the front brake fluid level. ( p. 172) • • • •
Bleed fork legs. ( p. 158) • • •
Check the steering head bearing play. • • • •
Change the spark plugs. x
• •
Check the valve clearance. x
• •
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and
incorrect routing. x
• •
Drain the drainage hose of the air filter box. x
• • •
Check the antifreeze and coolant level. • • • •
Check the wiring harness of the throttle valve body for damage and correct routing. x
• •
Check cables for damage and kink-free routing. x
• • •
Check that the cables are undamaged, routed without sharp bends and set correctly. • • • •
Check the play in the throttle cable. ( p. 215) • • • •
Change the air filter. Clean the air filter box. x
• • •
Check the fuel pressure. x
• • •
Check the value of the manifold absolute pressure sensor (PM value) with the KTM diagnostics
tool. x
• • •
Check the CO adjustment with the KTM diagnostics tool. x
• • •
Check the fluid level of the hydraulic clutch. ( p. 168) • • •
Check the screws and nuts for tightness. x
• • • •
Change the coolant. x
•
Change the front brake fluid. x
• •
Change the rear brake fluid. x
• •
To Next Page
Loading...
