11 SERVICE WORK ON THE CHASSIS 160
11.9 Removing the passenger seat
B01325-10
– Remove the seat. ( p. 158)
– Activate the release lever 1.
– Take off the passenger seat 2 toward the top.
11.10 Mounting the passenger seat
B01326-01
Warning
Danger of accidents The passenger seat can come loose from the anchoring if it
is not mounted correctly.
– After mounting the passenger seat, check that it is locked correctly by
pulling up.
– Position the passenger seat in the space provided.
– Press down the passenger seat until it clicks into place.
– Finally, check that the passenger seat is correctly mounted.
To Next Page
Loading...
Need help?
General
