13 WHEELS, TIRES 184
13.4 Installing the rear wheel x
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
– After installing the rear wheel, always operate the foot brake until the pressure point is reached.
C00341-10
Main work
–
Check the rear hub cush drive. x ( p. 186)
– Remove spacer 1. Clean and grease the mating surfaces of the spacers and the shaft
seal rings.
Long-life grease ( p. 262)
– Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Replace the wheel bearing. x
– Install the spacer.
– Clean the thread of the axle and nut.
– Clean the mating surfaces of the brake caliper frame and swingarm.
To Next Page
Loading...
