10 TUNING THE CHASSIS 151
10.25 Adjusting the subframe position
Warning
Danger of accidents Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
– Following modifications, ride slowly at first to get the feel of the new ride behavior.
Preparatory work
– Remove the seat. ( p. 158)
B01317-10
Main work
– Remove screws 1 with the bushings.
B01318-10
Raising the seat position:
– Remove screws 2 with the washers on the left and right sides of the vehicle.
– Push down on the subframe until the drilled holes of the frame are aligned with the
holes at the bottom front of the subframe.