9 SERVICE SCHEDULE 118
9.1 Service schedule
K10N K100A K200A K400A
Check that the electrical equipment is functioning properly. • • • •
Read out the trouble code memory using the KTM diagnostics tool. x
• • • •
Check the measured service values with the KTM diagnostics tool. x
• • •
Change the engine oil and filter, clean the oil screen. x ( p. 218)
• • • •
Check the oil jet for the clutch lubrication. x
• • •
Check the front brake linings. ( p. 174) • • • •
Check the front brake discs. ( p. 170) • • • •
Check the rear brake linings. ( p. 178) • • • •
Check the rear brake disc. ( p. 171) • • • •
Check that brake lines are undamaged and free of leaks. • • • •
Check the rear brake fluid level. ( p. 175) • • • •
Check the free travel of the foot brake lever. ( p. 143) • • • •
Check that the shock absorber and fork are leak tight. If necessary and depending on use, service
the fork and shock absorber.
• • • •
Check the swingarm bearings. x
• • •
Check wheel bearings for play. x
• • •
Check the tire condition. ( p. 187) • • • •
Check the tire pressure. ( p. 189) • • • •
Check the chain, rear sprocket and engine sprocket. ( p. 165) • • •
Check the chain tension. ( p. 162) • • • •
Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth operation. x
• • • •
Clean the dust boots of the fork legs. • • •
To Next Page
Loading...
