10 TUNING THE CHASSIS 122
B00572-10
– Turn adjusting screws 1 clockwise to the stop.
Info
The adjusting screws are located at the bottom end of the fork legs.
Make the same adjustment on both fork legs.
– Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping
Comfort 20 clicks
Standard 15 clicks
Sport 15 clicks
Full payload 15 clicks
Info
Turn clockwise to increase damping, turn counterclockwise to reduce suspension
damping.
10.3 Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
An optimally adjusted rebound damping brakes the springing energy and enables a fast, vibration-free resetting of the fork to the
zero position.
To Next Page
Loading...
