10 TUNING THE CHASSIS 147
100759-10
Adjusting the low position of the handlebar stubs:
– Loosen screw 1.
Info
Loosen the screw several turns to prevent damage to the fork paint when
moving the handlebar stub.
100760-10
– Remove screw 2 with distance sleeve 3.
– Carefully shift the handlebar stub by the length of the distance sleeve. Watch out
for the handlebar position difference.
Guideline
Length, distance sleeve 15 mm (0.59 in)
Handlebar position difference 6.5°
– Lay all cables between the upper triple clamp and the handlebar stub.
– Position the distance sleeve.
– Mount and tighten screw.
Guideline
Remaining frame bolts M5 5 Nm (3.7 lbf ft)
To Next Page
Loading...
