6 CONTROLS 89
401168-01
– Press the button and the button for 3 - 5 seconds.
– Press the button twice until the symbol shows SETTINGS in the info display.
– Press the MODE button briefly.
– Press the button once until the symbol shows LAP BLANK TIME in the info display.
– Press the MODE button briefly.
LAP BLANK T. appears on the info display.
Info
At delivery, LAP BLANK T. is set to 10 seconds.
Tip
With LAP BLANK TIME function, you can prevent the lap from being timed too
short. This may happen if you accidentally press the LAP button twice in a row.
– Set the blank time of the LAP button with the button or the button .
Info
LAP BLANK T. can be set between 1 and 200.
– Press the MODE button briefly.
The settings are stored and the display changes to the SETTINGS menu.
– Press the button briefly and repeatedly until the symbol shows BACK... in the info
display.
– Press the MODE button briefly.
– Press the button briefly and repeatedly until the symbol shows EXIT SETUP in the
info display.
– Press the MODE button briefly.
To Next Page
Loading...
