Kuka KR AGILUS sixx - Appendix; Tightening torque; Safety data sheets

119 / 141Issued: 28.03.2013 Version: MA KR AGILUS sixx V8 en (PDF)
9 Appendix
9 Appendix
9.1 Tightening torque
Tightening torque The following tightening torques are valid for screws and nuts where no other
specifications are given.
Tighten M5 domed cap nuts with a torque of 4.2 Nm.
9.2 Safety data sheets
9.2.1 Safety data sheet for Flexolub
®
-A1 lubricant
The following extract from the safety data sheet according to 1907/2006/EEC
must be observed.
9.2.1.1 Designation of substance/formulation and manufacturer
9.2.1.2 Composition / Information about the components
Strength class
Screw size 8.8 10.9 12.9
M1.6 0.17 Nm 0.24 Nm 0.28 Nm
M2 0.35 Nm 0.48 Nm 0.56 Nm
M2.5 0.68 Nm 0.93 Nm 1.10 Nm
M3 1.2 Nm 1.6 Nm 2.0 Nm
M4 2.8 Nm 3.7 Nm 4.4 Nm
M5 5.6 Nm 7.5 Nm 9.0 Nm
M6 9.5 Nm 12.5 Nm 15.0 Nm
M8 23.0 Nm 31.0 Nm 36.0 Nm
M10 45.0 Nm 60.0 Nm 70.0 Nm
M12 78.0 Nm 104.0 Nm 125.0 Nm
M14 125.0 Nm 165.0 Nm 195.0 Nm
M16 195.0 Nm 250.0 Nm 305.0 Nm
M20 370.0 Nm 500.0 Nm 600.0 Nm
M24 640.0 Nm 860.0 Nm 1030.0 Nm
M30 1330.0 Nm 1700.0 Nm 2000.0 Nm
Name of substance/preparation
Product name:
Flexolub
®
-A1
Use: Gear lubricant for Harmonic Drive gear units
Manufacturer designation
Company: Harmonic Drive AG
Address: Hoenbergstrasse 14, D-65555 Limburg a. d. Lahn
Country: Germany
Tel.: +49 (0)6431 5008 0
Fax: +49 (0)6431 5008 119
Chemical characterization: Combination of ester oils, lithium soap and additives.