126 / 141 Issued: 28.03.2013 Version: MA KR AGILUS sixx V8 en (PDF)
KR AGILUS sixx
9.2.2.9 Physical and chemical properties
9.2.2.10 Stability and reactivity
9.2.2.11 Toxicological information
9.2.2.12 Ecological information
Protective measures
Limitation and monitoring of
exposure in the workplace:
Provide extractor ventilation or other engineering controls to
keep the airborne concentrations of vapors below their respec-
tive occupational exposure limits.
Hygiene measures: Wash hands after handling the product and before eating,
smoking, using lavatory, and at the end of day.
Respiratory protection: Not essential. Sufficient ventilation is recommended in industry.
If ventilation is insufficient, respiratory protection is useful.
Hand protection: Wear protective gloves if prolonged or repeated contact is likely.
Chemical-resistant protective gloves. Recommended: nitrile
gloves. The right choice of protective gloves is dependent on
the chemicals to be handled, the working conditions, and the
condition of the gloves themselves (even the best chemical-
resistant protective gloves start to leak after repeated contact
with chemicals). Most protective gloves only provide protection
for a short period of time, after which they must be disposed of
and replaced. As the specific working conditions and the chemi-
cals concerned differ from case to case, appropriate safety
measures must be developed for each individual application.
Protective gloves should therefore be selected in consultation
with the supplier/manufacturer, giving full consideration to the
specific working conditions.
Eye protection: Protective goggles with side shields to guard against splashing.
Skin and body: Wear appropriate clothing to avoid prolonged skin contact.
Physical state: Solid (paste)
Color: Amber
Odor: Light
Melting point/range: >230 °C
Density:
<1000 kg/m
3
(<1 g/cm
3
) at 20 °C
Solubility: Insoluble in water
Incompatible with various
substances:
Reactive or incompatible with oxidizing materials.
Hazardous polymerization: Will not occur.
Carcinogenic effect: No component of this product at levels greater than 0.1% is
identified as a carcinogen by ACGIH, the International Agency
for Research on Cancer (IARC) or the European Commission
(EC).
Persistence / degradability: Inherently biodegradable.
Mobility: The product is non-volatile. Paste. Insoluble in water.
Environmental hazards: Harmful to aquatic organisms. May cause long-term adverse
effects in the aquatic environment.
To Next Page
Loading...
