120 / 141 Issued: 28.03.2013 Version: MA KR AGILUS sixx V8 en (PDF)
KR AGILUS sixx
9.2.1.3 Possible hazards
Hazard designation not applicable.
9.2.1.4 First aid measures
9.2.1.5 Fire-fighting measures
9.2.1.6 Measures after unintended release
Contact with eyes: Flush with plenty of water. If irritation continues, seek medical 
attention and present this safety data sheet.
Skin contact: Remove contaminated clothing. Wash affected areas of skin 
with soap and water.
If grease has penetrated into the skin due to improper handling 
of a high-pressure lubrication gun, seek medical attention 
immediately and present this safety data sheet.
Inhalation: Remove affected person to fresh air. If breathing stops, initiate 
artificial respiration. Seek medical assistance and present this 
safety data sheet.
Ingestion: Do not induce vomiting. If the person is unconscious, do not 
give anything by mouth. Consult a physician immediately and 
present this safety data sheet.
Notes to physician: Treatment should in general be symptomic and directed at 
relieving any effects.
Note regarding high-pressure applications.
Injection into the skin due to contact with a product under high 
pressure constitutes a major medical emergency. Within a few 
hours the tissue swells up and becomes discolored and 
extremely painful, with severe subcutaneous necrosis.
Surgical treatment is absolutely imperative. Comprehensive 
opening of the wound and the tissue beneath it is necessary in 
order to reduce tissue loss and to prevent or limit lasting dam-
age. The high pressure can cause the product to penetrate 
extensive areas of tissue layers.
Suitable extinguishing 
agents:
In the event of a fire, use a dry-chemical extinguisher with ABC 
or BC powder, or a foam or carbon dioxide extinguisher.
Unsuitable extinguishing 
agents:
Do not use water.
Protection of fire-fighters: In the case of fire, hazardous gases may develop. Respiratory 
protection is necessary during fire-fighting measures.
Environmental precautions 
and clean-up methods:
Wipe up small amounts with a cleaning cloth or absorb with oil-
binding agents and dispose of in accordance with  
(>>> 9.2.1.13 "Disposal information" Page 122). Contain large 
amounts of spilled product with sand or other inert material. 
Prevent from entering sewers, streams and waterways. Safe-
guard entrances to the drainage system. Slip hazard! Avoid fire 
and naked lights. No smoking!