Name: KYMCO SUPER8 50 2T
Brand: KYMCO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

13.STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK

ABSORBER/FRONT FORK

13-17

SUPER8 50 2T

Apply grease to the top and bottom ball races

and install 20 steel balls on the top ball race

and 15 steel balls on the bottom ball race.

Apply grease to the ball races and install the

front fork.

Apply grease to the top cone race and install

it.

Tighten the top cone race and then turn the

steering stem right and left several times to

make steel balls contact each other closely.

Install the steering stem lock nut and tighten it

while holding the top cone race.

Torque: 7.0～8.0kg-m

Install the front wheel. (

12-15)

HANDLEBAR INSTALLATION

Install the handlebar onto the steering stem

tube and then install and tighten the bolt.

Torque: 4.5kg-m

Install the front wheel. (

12-6)

Install the brake levers. (

12-15)

Install the handlebar covers.

Top Steel Ball

Top Cone Race

Top Cone Race Lock Nut Wrench

Nut

Steerin

Stem Lock Nut Wrench

Check that the steering stem rotates

freely without vertical play.

＊

Questions and Answers:

Need help?

Do you have a question about the KYMCO SUPER8 50 2T and is the answer not in the manual?

KYMCO SUPER8 50 2T Specifications

General