Name: KYMCO SUPER8 50 2T
Brand: KYMCO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6. CYLINDER HEAD/CYLINDER/PISTON

6-3

SUPER8 50 2T

CYLINDER HEAD

REMOVAL

Remove the rear carrier.

Remove the frame body cover. (

12-5)

Remove the spark plug cap.

Remove the three bolts attaching the fan

cover to remove the fan cover.

Remove the two joint lock nuts on the front

of the exhaust muffler and then remove the

two exhaust muffler lock bolts.

Remove the bolt attaching the engine hood

to remove the engine hood.

The installation sequence is the reverse of

removal.

Remove the spark plug.

Remove the cylinder head bolts and the

cylinder head.

Remove the cylinder head gasket.

Loosen the bolts diagonally in 2 or 3

times.

＊

Cylinder head Bolts

Spark Plug Cap

Fan Cover/Engine Hood

Bolts

Cylinder Head

Spark Plug

When installing the exhaust muffler, first

tighten the two nuts on the front and

then tighten the two bolts.

＊

Bolt

Questions and Answers:

Need help?

Do you have a question about the KYMCO SUPER8 50 2T and is the answer not in the manual?

KYMCO SUPER8 50 2T Specifications

General