Maintenance
6-4 BASIC OPERATION GUIDE
3
Lift the Process Unit and the
Toner Container, out of the
machine.
IMPORTANT: Place the process
unit on a clean, level surface.
The drum in the process unit is
sensitive to light. Never expose
the drum even to normal office
lighting (500 lux) for more than
five minutes.
Never stand the process unit on end.
4
Pull the lock lever towards you
into its release position (marked
UNLOCK), then pull the Toner
Container release lever to the
right as indicated by the arrow
(Î).
5
Gently remove the old Toner
Container. Place it in the supplied
plastic bag and dispose of it.
WARNING: Do not attempt to incinerate the Toner Container.
Dangerous sparks may cause burns. Do not attempt to force open
or destroy the Toner Container
6
Shake the new Toner Container
horizontally 5 or 6 times to ensure
the toner is evenly distributed.
To Next Page
Loading...
