Kyocera FS-1018MFP

Machine Parts
2-2 BASIC OPERATION GUIDE
Main Body
1 Original Cover — Open/close when you are positioning the original
on the Platen.
2 Platen — Place originals here for copying. Ensure originals are face-
down and align them against the left rear corner of the Platen.
3 Original Size Indicator Plate — Ensure originals are aligned
against this plate when positioning them on the Platen.
4 Operation Panel — Perform operations here.
5 Top Cover — Open when you need to replace the Toner Container,
or if a paper jam occurs inside the machine.
6 Front Cover — Open to replace the Toner Container, or if a paper
jam occurs inside the machine.
7 Process Unit — Remove to replace the Toner Container or if a
paper jam occurs inside the machine
8 Charger Cleaner — Slide this knob back and forth to clean the
charger.
9 Lock Lever — Operate to replace the Toner Container.
10 Toner Container
11 Toner Container Release Lever — Operate to replace the Toner
Container.
1
2
3
4
5
6
7
10 119
8