Preparation
BASIC OPERATION GUIDE 3-19
Character Entry
Input screen and key functions
To enter e-mail addresses, file names, etc. the characters are entered
using the keypad.To move the cursor, use the and keys.
1 Cursor - Characters are entered in the location of the cursor. To
delete a character, move the cursor to the location of the
corresponding character and press [Stop/Clear].
2 Character Limit Icon - Indicates when character entry has reached
the maximum number allowed.
3 Keypad - Use to enter characters. Refer to page 3-20 for a list of
characters that can be entered using each key.
4 Reset/Power Key - Use to cancel the machine’s temporary
conditions and character entry procedure.
5 Select Key (left) - Press to select options available on the bottom left
of the display.
6 Select Key (right) - Press to switch between character entry modes.
7 Key - Press to move the display cursor to the left.
8 Back key - Press to go back to the previous screen of the current
menu.
9 Key - Press to move the display cursor upwards.
10 Key - Press to move the display cursor downwards.
11 Enter Key - Press this key to register the currently entered
characters.
12 Key - Press to move the display cursor to the right.
13 Stop/Clear Key - Press to delete the character in the cursor position.
If the cursor is in an open position, the character to the left of the
cursor is deleted.
4
13
3
7
8
56
9
10
11 12
2
1
Text
ABC
Cancel
Address Entry:
h_pttr@
To Next Page
Loading...
