Optional Equipment
5-4 BASIC OPERATION GUIDE
Names of Parts
1 Left Cover — Open this
cover if an original jam
occurs.
2 Original Insert Guides —
Align these guides to fit the
width of the originals to be
copied.
3 Original Table — Place
originals to be copied on this
table.
4 Original Eject Table — Originals that have been copied are ejected
and stored here.
5 Ejection Extension — Open this extension when using larger sized
originals such as 8
1/2 × 13" (Oficio II), 81/2 × 14" (Legal) and Folio.
Placing Originals in the Document Processor
1
Adjust the original insert guides to
fit the width of the original(s).
IMPORTANT: To prevent jams,
remove any originals remaining
on the Original Eject Table and
’fan’ the originals to separate the
sheets before loading them.
2
Arrange the originals in order and
place face up on the Original
Table. Slide the leading edge of
the originals into the Document
Processor, as far as they will go.
1
2 4 5
3
To Next Page
Loading...
