Preparation
BASIC OPERATION GUIDE 3-7
Using the Face-up Tray
When copying and printing onto special paper, such as thick paper (90 to
163 g/m²) and transparencies, always use the Face-up Tray. The Face-up
Tray can hold approximately 30 sheets of standard paper (80 g/m²), but
only 1 sheet of special paper can be stored there at one time.
NOTE: To avoid paper jams or damage to the machine, do not leave
more than approximately 30 sheets of standard paper or one sheet of
special paper in the Face-up Tray.
1
Open the Face-up Tray (located
at the rear of the machine).
2
Perform the standard copying or
printing procedure.
Finished copies or prints will be
delivered to the Face-up Tray.
IMPORTANT: Always close the
Face-up Tray after use, it should
not be left open.
To Next Page
Loading...
