Kyocera FS-1018MFP

Machine Parts
BASIC OPERATION GUIDE 2-5
Operation Panel
1 Status/Job Cancel Key and Indicator — Press to access the
Status Menu screen. (For information, refer to
Chapter 4,
Advanced Operation Guide
.)
2 Copy Key and Indicator — Press to use the copier functions. The
indicator will light when the machine is in Copying Operation mode.
3 E-Mail (Scan) Key and Indicator — Press to use the scanner
functions. The indicator will light when the machine is in the
Scanning Operation mode.
4 One Touch Keys (1 to 8) — The One Touch Keys can be used to
register e-mail destination information. (For information, refer to
Chapter 5, Advanced Operation Guide.) Enter information for the
registered destinations on the supplied One Touch Key sheet and
insert it between the One Touch Keys from the bottom side of the
Operation Panel.
5 Scan Color Select Key and Indicator — Press to change the Scan
Color mode. (For information, refer to
Chapter 2, Advanced
Operation Guide
.)
6 Scan Resolution Key and Indicator — Press to change the Scan
Resolution. (For information, refer to
Chapter 2, Advanced
Operation Guide
.)
7 Function Key and Indicator — Press to access the Function
screen.
8 Print Indicator — Flashes green when the machine is processing a
printing job.
9 Send/Receive Indicator — Flashes green when the machine is
sending or receiving data.
1. 2
3
13 14107981156
28
15
4
16
12
23
2218
20 2117 19 24
25
27 26 29
*
Ready to copy.
A4
A4
:1
Zoom
100%
set