Kyocera FS-1018MFP

Machine Parts
2-6 BASIC OPERATION GUIDE
10 Error Indicator — Flashes red when an error occurs. Check the
message display and follow instructions to correct the error. (Refer to
page 7-5)
A red light displays when the machine is experiencing a mechanical
problem. Switch off the power ({) and then switch on ( | ) again. If
the Error indication still displays, make a note of the message
displayed.
11 System Menu/Counter Key and Indicator — Press to change the
display language and program default and other settings. (For
information, refer to the
Advanced Operation Guide.)
12 Keypad — Use to enter the number of copies and other values. Also
used to enter characters.
13 Reset/Power Key — Press to reset all temporary selections made.
The machine returns to the Initial Mode. Press for at least two
seconds to engage auto sleep mode. To release the machine from
auto sleep mode, press again. (Refer to Auto Sleep Mode on page
4-18.)
NOTE: Initial Mode is the state the machine enters after warm-up. If no
operations are performed for a preset period of time, the machine returns
to initial mode. Any settings that have been selected will be cleared. For
more information, refer to the Advanced Operation Guide.
14 Main Power Indicator — A red light displays when the power switch
is on ( | ).
15 Original Quality Key and Indicator — Press to select the Original
Quality. (Refer to Basic Copying Procedure on page 4-2.)
16 Original Size Key and Indicator — Press this key to light the
indicator to select the size of the original. (For details, refer to the
Advanced Operation Guide.)
17 Exposure Key and Indicator — Press to change the Exposure
setting.
18 Paper Select key and Indicator — Press to switch paper feed
between the cassette(s) and the MP tray.
19 Message Display — Displays messages about machine operation
and errors. (Refer to Message Display on page 2-7.)
20 Left Select Key — Press to select options available on the bottom
left of the display. If pressed when Cancel displays, the top screen for
the current menu returns.
21 Right Select Key — Press to select options available on the bottom
right of the display.
22 Back Key — Press to go back to the previous screen of the current
menu.
23  Key - Press to move the display cursor to the left. Also used to
verify, enter or delete an e-mail destination.