Kyocera FS-1018MFP

Basic Operation
BASIC OPERATION GUIDE 4-11
Using Collate Mode
Multiple originals can be scanned into memory in a single operation and
the required number of copy sets created.
The maximum number of originals which can be scanned depends on the
machine’s available memory.
If the optional Document Processor is installed, Collate mode is selected
automatically when originals are loaded in the Document Processor.
NOTE: Continuous Scan must be On if using Collate mode. For details,
refer to Chapter 1, Advanced Operation Guide.
1
Press [Copy]. The Copy Basic screen displays.
2
Press [Function].
3
Press  or  to select Collate
and then press [Enter]. The
Collate screen displays.
4
Press  or  to select On or Off
and then press [Enter].
A Completed message displays
and the Function screen returns.
Original Collate: OnCollate: Off
Copy
*
Combine
Zoom
Collate
Function:
Exit
*
Collate:
*
Cancel
Off
On