Kyocera FS-1018MFP

Preparation
3-14 BASIC OPERATION GUIDE
Setting the Time Zone
Use the following procedure to designate the time zone that you are in.
NOTE: COMMAND CENTER can also be used to program this setting,
refer to the Advanced Operation Guide for information.
1
Press [System Menu/Counter]. The Sys. Menu/Count screen displays.
2
Press  or  to select Date/
Timer Set and press [Enter].
The Date/Timer Set screen
displays.
3
Press  or  to select Time Zone
and press [Enter].
The Time Zone screen displays.
4
Press  or  to select the Time
Zone required and press [Enter].
A Completed message displays
and the Date/Timer Set screen
returns.
*
Sys. Menu/Count.:
System Setting
Date/Timer Set.
Adjust
Exit
*
Exit
Date/Timer Set.:
Time Zone
Date Format
Year/Time
-05:00 Indiana
Cancel
Time Zone:
-05:00 Bogota
-05:00 Estn Time