Preparation
3-2 BASIC OPERATION GUIDE
Loading Paper
Paper and media can be loaded in the Cassette or MP Tray.
NOTE: For information about the types of media that can be used, refer
to Chapter 5, Advanced Operation Guide.
Prepare the Paper
After removing paper from the
packaging, fan through the sheets
to separate prior to loading.
If using paper that has been
folded or is curled, straighten it
prior to loading. Failure to do so
may result in a paper jam.
If using paper that has already
been copied or printed on, ensure
staples or clips are removed.
Loading Paper into a Cassette
Standard paper (60 to 90 g/m²), thick paper (90 to 105 g/m²), recycled
paper, or color paper can be loaded. Up to 250 sheets of standard paper
(80 g/m²) can be loaded into each cassette at one time.
The paper sizes which can be loaded are: A4, A5R, ISO B5, JIS B5, Folio,
16K, 8
1/2 × 14" (Legal), 8 1/2 × 11" (Letter), Executive, and 8 1/2 ×13"
(Oficio II).
NOTE: When loading paper for the first time, or when changing paper
sizes, use the Operation Panel to register the paper size. Refer to page 3-
5.
1
Pull the cassette completely out of
the machine.
IMPORTANT: When pulling the
cassette out of the machine,
ensure it is supported and does
not fall out suddenly.
To Next Page
Loading...
