Preparation
3-6 BASIC OPERATION GUIDE
2
Pull out the MP Tray Extension
and then flip it open.
3
Adjust the insert guides to fit the
width of the paper.
4
Slide the paper along the insert
guides and into the tray as far as
it will go.
IMPORTANT: Only load the MP Tray when you are planning to use it. Do
not leave paper in the MP tray for long periods of time.
When loading the MP Tray, ensure the side to be copied or printed onto is
facing upward.
When using 8
1/2 × 14" (Legal), 8 1/2 × 13" (Oficio II), or Folio size paper, it
is recommended that you use the cassette(s). If you need to use the MP
Tray and the paper does not feed smoothly, continue to support the paper
by its trailing edge until all of the paper has been fed into the machine.
To Next Page
Loading...
