Troubleshooting
BASIC OPERATION GUIDE 7-9
MP Tray and inside the Machine
NOTE: If there are any finished copies or printouts on the Output Tray,
remove them first before performing this procedure.
1
Open the Top Cover.
2
Open the Front Cover.
3
Remove the Process Unit from
the machine.
4
If the leading edge of the jammed
paper is visible, pull it out.
If the paper is not visible, perform
the Cassette procedure.
If the paper has been fed to the
rear of the machine but the
leading edge is not visible,
perform the Face-up Tray
procedure.
To Next Page
Loading...
